The working principle of a brazing machine is mainly to melt the brazing material (filler metal with a melting point lower than the base material) through heating, and use liquid brazing material to wet the gap between the base material and the filling joint, and achieve the method of connecting the welded parts by mutual diffusion with the base material. The following are the main steps and principles of brazing machine operation:
Heating: The brazing machine uses different heating methods (such as flame, induction, resistance, laser, etc.) to heat the brazing material and the base material to a temperature above the brazing material melting point but below the base material melting point. In this way, the brazing material will melt into a liquid state, while the base material remains solid.
Wetting and diffusion: When the brazing material melts, it will wet the surface of the base material, that is, the liquid brazing material forms a thin film on the surface of the base material. Subsequently, mutual diffusion occurs between the liquid solder and the base metal, and the alloying elements in the solder will enter the lattice of the base metal, while the alloying elements in the base metal will also enter the solder, forming a strong metallurgical bond.
Capillary action: On the basis of wetting the base metal with liquid solder, the liquid solder will fill the gaps along the base metal and flow through the capillary action in the solder joint to fill the entire joint gap.
Cooling and solidification: When the brazing material fills the joint gap, the brazing machine stops heating and the brazing material begins to cool and solidify. During the solidification process, mutual diffusion between the liquid solder and the base metal continues to occur, further enhancing the connection strength. Finally, the liquid solder completely solidifies, forming a sturdy brazed joint.
The specific working principle of brazing machines may vary depending on the type of equipment and heating method. But overall, brazing machines achieve reliable connection of metal materials through steps such as heating, wetting, diffusion, filling, and cooling solidification. This connection method has the advantages of smooth joints, precise dimensions, small deformation, and the ability to connect different metals, making it widely used in fields such as aviation, aerospace, electronics, and automobiles.
Jun 08, 2024
Leave a message
What Is The Working Principle Of A Brazing Machine
Send Inquiry





